Rust is eating your roof. We stop it.
Stops rust, reflects heat, and adds years to metal roofing systems. Professional-grade coatings from Nationwide Products.
What is metal coating?
Metal roofs are built to last — but Florida's salt air, humidity, and UV exposure accelerate corrosion. Rust starts at fasteners and seams, then spreads across panels. A professional metal roof coating stops that process, seals out moisture, and reflects heat that would otherwise expand and contract the metal panels. Our coatings come from Nationwide Products and are designed specifically for metal substrates.
How Florida's Climate Attacks Metal Roofs
Metal roofs are among the most durable roofing systems available — but Florida presents a uniquely hostile environment for metal. Three factors combine to accelerate deterioration:
First, salt air. If you're within 15 miles of the Gulf Coast — which includes nearly all of Sarasota and Manatee counties — salt-laden air constantly deposits corrosive chloride on your metal panels. This is especially aggressive on standing seam joints and exposed fastener heads, where protective coatings are thinnest.
Second, UV radiation. Florida's intense UV doesn't just fade the paint on your metal panels — it degrades the factory-applied coating that protects the metal from corrosion. Once that factory finish breaks down, the bare metal is exposed to moisture and salt, and oxidation begins.
Third, thermal cycling. Metal expands and contracts more than any other roofing material. On a Florida summer day, your metal roof surface can reach 140°F by midafternoon and cool to 75°F overnight. That 65-degree daily swing causes the panels to physically move — stressing fasteners, opening seams, and eventually creating gaps where water can enter.
Professional metal roof coating addresses all three threats simultaneously: it blocks UV from reaching the factory finish, seals seams and fasteners against moisture intrusion, and reflects enough heat to reduce thermal cycling stress by 30–40%.
Why choose metal coating?
Here's what sets our metal coating service apart.
Stops rust and corrosion
Seals exposed metal surfaces and fasteners, halting the oxidation process immediately and preventing future rust development.
Reflects heat
Coated metal roofs run 40°F+ cooler on summer days, reducing thermal cycling stress on the panels and lowering your cooling bills significantly.
Seals seams and fasteners
The coating bridges panel seams and encapsulates fasteners — the two most common leak points on any metal roof in Florida.
Extends roof life 15+ years
A properly coated metal roof can last decades longer than an uncoated one exposed to Florida's coastal climate.
How it works
Our simple, transparent process from start to finish.
Metal Roof Assessment
We check every panel, seam, and fastener for rust, corrosion, loose connections, and seam separation. We also assess the metal gauge and condition to confirm coating is the right approach.
Prep & Coat
We treat all rust spots with rust converter, tighten or replace loose fasteners, seal any seam separations, and apply the coating system across the entire roof surface. Special attention goes to transitions, valleys, and ridge caps.
Documentation
We provide a full assessment report with before/after photos, warranty documentation, and maintenance recommendations.
Technical Specifications
The details that matter — for homeowners and professionals alike.
Is this right for you?
This service is ideal for:
- Metal roofs showing early signs of rust at fasteners or seams
- Standing seam metal roofs with faded or degraded factory finish
- Coastal properties within 15 miles of the Gulf (salt air exposure)
- Buildings with high cooling costs from heat-absorbing dark metal roofs
- Metal roofs that are structurally sound but aesthetically aged
Why not just replace?
Metal roof replacement is one of the most expensive roofing options — often $15,000–$30,000 or more for a residential home. A professional coating at a fraction of that cost stops rust, seals leaks, and adds 15+ years of life. For a metal roof that's structurally sound but cosmetically aged or showing early corrosion, coating is the clear winner.
Local to Southwest Florida
Metal roofs are common throughout the Sarasota–Bradenton–Venice corridor, from the coastal homes on Siesta Key and Casey Key to the commercial buildings along Fruitville Road and Clark Road. The salt air from the Gulf makes metal roof maintenance especially critical in this area — uncoated metal roofs near the coast can show rust in as little as 5–8 years.
See Our Work
Real photos from real jobs across Southwest Florida.
Common Questions
Got questions? Here are the answers to the most common ones.
Yes, as long as the rust hasn't eaten through the metal panels. We treat all rust spots with a professional rust converter before coating. If panels are perforated, they need to be replaced first.
Standard is white for maximum reflectivity and cooling benefit. Custom colors are available on request — though white provides the best energy performance.
It helps significantly. The reflective coating reduces the temperature differential that causes thermal expansion and contraction — which is what creates those popping sounds.
Most residential metal roofs are completed in 2–3 days including prep. Commercial buildings may take longer depending on size and condition.
Ready to protect your roof?
Get a free assessment and quote for metal coating. Same-week availability, no pressure.
Licensed • Insured • 5-Star Rated